Makita TD002GZ01 40V Cordless Brushless Impact Driver XGT Series) [Bare Tool]
₱18,950.00
Bare Tool - Battery and Charger not included
Features:
- 40Vmax XGT BL Brushless Cordless Wood/Bolt/T-Mode 220 N·m (1,950 in.lbs.) Impact Driver
- More comfortable operation in a wide range of applications from light-duty screw tightening to heavy-duty metal fastening
- Dual spring technology
- The hammer is designed to be driven by a dual spring unit consisting of two types of springs with different load capacities
- The hammer is driven by one spring in light-duty operation, and by two springs in heavy-duty operation. Thus, the impact power is adjusted according to the workload, providing added comfort in a wide range of applications from delicate screw tightening to heavy-duty metal fastening
- The above-mentioned optimal impact blow suppresses increase in recoil and vibration, which occur after the tool starts impact blow
- (The two effects have been confirmed through the tests using 120 mm coarse thread screw)
- 4 LEDs on the front of tool head
- Brighter illumination on the workpiece obtained by:
- locating 4 LEDs on the front of tool head
- reducing projections that project from both sides of tool head and body
- Higher visibility of the workpiece achieved by using a newly designed LED lens to make the shadow of bit lighter
- With preglow and afterglow functions
- 3 brightness settings
- Increased screw tightening speed
- Compared with our current models, increased screw tightening speed has been achieved by increasing the number of impacts in Mode 4 (Max impact mode)
- New appearance design
- The current design has been changed by adding camouflage pattern and more
- Light mode
- To turn on the light, set F/R change lever in the neutral position and pull the switch trigger. To turn off the light, pull the switch trigger again
- The light turns off automatically one hour after turned on
- New one-touch bit installation
- Reduced resistance allows for easier bit installation
- High Power 220 N·m
- Genuine solution for high demand industrial users
- Having excellent ability to perform heavy-duty continuous tightening; Able to continuously tighten heavy duty screws such as metal fastening screws or lag screws
- Multiple operation modes for a wide range of applications; 4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes)
- Improved bolt modes for more convenience in tightening machine screws
- Constant speed control maintains fastening torque by minimizing the rotation speed reduction caused by decreased battery capacity
- One-touch speed selector provides precise fastening control for a wide range of applications
- Enhanced anvil holder rigidity; Material change from Needle bearing to Ball bearing provides reduction of bit wobbling
- Variable speed control by trigger for precise fastening in a wide variety of applications
- Ergonomically designed handle with rubberized soft grip for increased comfort
- Reversing switch is conveniently located
- Auto-stop in bolt mode (both in Forward/Reverse rotations)
- Electric brake for maximum productivity
- Trigger lock minimizes accidental start-up during transportation
- Durable, reversible belt clip convenient for temporary tool hanging
- eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Battery protection circuit protects against overloading, over-discharging and over-heating
Specifications:
| CAPACITY | Machine screw: M4 – M8 (5/32 – 5/16″) |
| Standard bolt: M5 – M16 (3/16 – 5/8″) | |
| High strength bolt: M5 – M14 (3/16 – 9/16″) | |
| Coarse thread (in length): 22 – 125 mm (7/8 – 4-7/8″) | |
| Steel: 22 mm (7/8″) | |
| Wood (Auger bit): 24 mm (15/16″) | |
| HOLE SAW DIAMETER | 38 mm (1-1/2″) |
| HEX SHANK | 6.35 mm (1/4″) |
| SHANK/DRIVE | Hex Shank 6.35 mm (1/4″) |
| NO LOAD SPEED (RPM) | Max / Hard / Med. / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 – 3,700 / 0 – 3,200 / 0 – 2,100 / 0 – 1,100 / 0 – 1,800 / 0 – 2,700 / 0 – 3,700 / 0 – 3,700 / 0 – 2,900 / 0 – 3,700 |
| IMPACTS PER MINUTE (IPM) | Max / Hard / Med. / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 – 4,600 / 0 – 3,600 / 0 – 2,600 / 0 – 1,400 / 0 – 4,600 / N/A / 0 – 4,600 / 0 – 4,600 / N/A / 0 – 2,600 |
| FASTENING TORQUE | Hard / Med. / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.) |
| MAX FASTENING TORQUE | 220 N·m (1,950 in.lbs.) |
| MAX OUTPUT | 500 W |
| VIBRATION LEVEL | Impact tightening of fasteners of the maximum capacity of the tool: 12.9 m/s² |
| VIBRATION K FACTOR | 1.5 m/s² |
| SOUND PRESSURE LEVEL | 94 dB(A) |
| SOUND POWER LEVEL | 105 dB(A) |
| NOISE K FACTOR | 3 dB(A) |
| DIMENSIONS (L X W X H) | w/o Battery: 119 x 86 x 197 mm (4-11/16 x 3-3/8 x 7-3/4″) |
| w/ BL4020 / BL4025: 119 x 86 x 247 mm (4-11/16 x 3-3/8 x 9-3/4″) | |
| w/ BL4040: 119 x 86 x 252 mm (4-11/16 x 3-3/8 x 9-7/8″) | |
| w/ BL4050F: 119 x 86 x 278 mm (4-11/16 x 3-3/8 x 11″) | |
| w/ BL4080F: 119 x 86 x 297 mm (4-11/16 x 3-3/8 x 11-3/4″) | |
| NET WEIGHT | 1.7 – 2.9 kg (3.7 – 6.4 lbs.) |