FEATURES:
- 48.9 J AVT SOFT NO LOAD Electric Breaker, 30 mm Hex Shank
- Both drastically increased power and low vibration are achieved with minimum increase in tool size and weight
- Powerful 1,850 W motor delivers 48.9 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
- Thanks to completely redesigned hammering mechanism and increased motor power as compared with HM1317C series, higher power is achieved with minimum increase in tool size and weight
- Despite the drastically increased power; Anti-vibration housing, Active dynamic vibration absorber and Soft no-load keep the vibration lower than that of HM1317C series, allowing for efficient chipping for a long period
- L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- Variable speed control dial enables user to match the speed to the application for greater versatility
- L.E.D. power light indicates switch failure or cord damage
- Rubberized ergonomic soft grip provides more comfort
- Soft start suppresses start-up reaction for more precision and better accuracy
- Extended life brushes are longer for more work between service intervals and less downtime
- Automatic brush cut-off protects commutator from damage for longer tool life
- Easy-to-operate slide switch increases productivity and allows for continuous use
- Side handle swivels 360° for greater control
- Double insulated
SPECIFICATIONS:
| Blows Per Minute (BPM) | 1300 |
| Dimensions (L x W x H) | 781 x 130 x 266 mm (30-3/4 x 5-1/8 x 10-1/2″) |
| Impact Energy | EPTA-Procedure 05/2009: 48.9 J |
| Noise K Factor | 1.57 dB(A) |
| Sound Power Level | 105 dB(A) |
| Sound Pressure Level | 85 dB(A) |
| Vibration K Factor | Chiselling: 1.5 m/s² |
| Vibration Level | Chiselling: 6.5 m/s² |
| Net weight | 19.2 kg (42.3 lbs.) |
| Power supply cord | 4.0 m (13.1 ft) |