Makita DTD173Z 18V Cordless Brushless Impact Driver (LXT-Series) [Bare Tool]

Bare Tool - Battery and Charger not included

• Next generation design improves tool ergonomics by reducing tool circumference and revising the configuration of the battery and the switch panel compared to previous models.
• Slim tool body - the protrusions on the LED sections on both sides have been eliminated which improves driving performance in tight corners or confined spaces.
• Ring illumination LED emits light in a ring shape from the tip of the hammer case which significantly reducing the shadow of the bit.
• LED brightness (3 stages) can be changed by pressing and holding the mode switch button.
• Easy-to-see switch panel - moved to the rear side of the battery, allowing the user to check and change the mode during operation.
• Optimal battery layout - the center of gravity has been moved closer to the center line of the grip, by locating the battery 12mm backward compared with the previous model, reducing the strain on the wrist during operation.
• Light mode - to turn on the light, set forward/reverse change lever in the neutral position and pull the switch trigger.  To turn off the light, pull the switch trigger again.  The light turns off automatically after one hour.
• Next generation compact design with an overall length of 111mm (reduction of 3mm).
• Genuine Makita purpose built brushless motor delivers 3,600 max RPM and 1590 in. lbs (180 Nm) of max torque.
• Variable speed control by ergonomic trigger.
• Equipped with Quick mode-switching button.
• 4-stage impact power selection.
• One-touch bit installation provides reduced resistance and allows for easier bit installation while holding the bit more securely.
• XPT (eXtreme Protection Technology) provides for industry leading durability against water, dust and debris.
• Equipped with belt hook for safety and convenience.
• Anti-bit wobbling structure provides for precise and controlled operation.
• Assist mode ideal for use with thin and thick metal, wood and bolts.
• Ergonomically designed handle for outstanding comfort and control.
  

Specifications

• Drive Shank 6.35mm (1/4") Hex
• Impact Rate: Max.: 0 - 3,800ipm / Hard: 0 - 3,600ipm / Med: 0 - 2,600ipm / Soft: 0 - 1,100ipm
• Max. capacities high tensile bolt M5-M14 (3/16 - 9/16")
• Max. capacities standard bolt M5-M16 (3/16-5/8")
• Fastening torque: Max.: 170 / Med.: 50 / Soft 20 N·m
• No Load Speed Max.: 0 - 3,600rpm / Hard: 0 - 3,200rpm / Med: 0 - 2,100rpm / Soft: 0 - 1,100rpm
• Voltage 18V
• Weight 1.5kg (3.3 lbs.)