Dremel 409 Thin Cut-off Wheels (36pcs)
₱460.00
Dremel 409
Cut-off Wheels (36pcs)
Cut-off Wheels (36pcs)
For cutting metal with limited use on wood and plastic. Cut-off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood, and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
- Use with mandrel 402
- Makes it easy to cut or slot bolts and screws
- Use on sheet metal, thin wood & plastic
- Cuts only along its edge
- 0.025" thick, 36 per vial
User Tips
- The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
- Secure objects to a stable surface while working.
- Hold the tool so that the wheel is at a perpendicular angle to the material being cut.
- Keep a light touch, as the wheel will break under too much pressure. If chattering occurs, increase speed.
- Plastics require very slow speeds, because they tend to melt at the contact point. Wood requires low speeds also, always experiment on a scrap first.
Shank diameter: 3,2 mm
Working diameter: 24,0 mm
Max working depth: 10,0 mm
Maximum RPM: 35.000 1/min
Working diameter: 24,0 mm
Max working depth: 10,0 mm
Maximum RPM: 35.000 1/min